Digital Dignity Digital Dignity

Fan diameter from this nameplate

A seller’s catalog sheet says 300 mm fan, or “Ø300.” THIS inbound unit’s nameplate prints a different diameter — 250 mm, 350 mm, 300mm, “Ø250,” a fan-diameter line — or no diameter at all, only a CFM leftover, a blade leftover, or a blank fan block. They almost kit the sheet 300 mm into the listing because the catalog is already open, purchasing signed that fan, and last month’s lot really was 300 mm. If you do that, a shopper or an installer reads a fan this unit will not ship, a motor job sees a diameter this plate does not print, and the next receive inherits the same lie. Digital Dignity’s Transformation Kit is the check on THIS unit: photograph the inbound nameplate, kit from the fan diameter this plate prints (or from the absence of a fan line), then free optimize, then Pro.

Get the kit · Free optimize · Pro checkout

This is a listing and inbound job, not a catalog-sheet rewrite. 300 mm is how the catalog and the factory sheet quote the SKU. The nameplate on THIS inbound is what this receive actually is. The kit does not convert a sheet 300 mm into the plate fan for you. It makes you write the diameter THIS plate prints — 250 mm, 300 mm, 350 mm, Ø250, a fan line that is actually stamped, or no diameter at all — then you decide save, split, or hold. If this plate prints no fan line, write that absence. Do not invent 300 mm from a CFM guess so the category still looks complete.

Fan diameter is a shopper fact when the buyer is matching a motor, a cooler, or a replacement impeller. It is not a title adjective you can keep “because the sheet said 300 mm.” A 250 mm plate is a different fan from a 300 mm plate. A 350 mm plate is a different fan again. CFM on the same plate is a related line, not a substitute you convert in your head and paste as 300 mm. If this plate prints 1200 CFM only, write the airflow as printed and leave the sheet 300 mm off the pad. Do not back-solve 300 mm from a blade count because that is how last year’s lot was quoted.

Read THIS nameplate. The sheet 300 mm stays in the folder

Pull one sealed unit from the inbound you will list or receive this week. Find the nameplate on the unit, or the fan / Ø / impeller line on the carton panel this pack prints. Write type, size or count, material, and what is in the box from that face and the insert. Then write the fan diameter exactly as this plate prints it — not 300 mm from the sheet. If this plate prints 250 mm, 350 mm, Ø250, or “300mm,” write that line on the pad. If this plate prints no fan line at all, write that absence. Do not invent 300 mm so the category still looks complete. Photo of the pad next to this nameplate. After that, open the catalog sheet. If it still says 300 mm, leave that line on a scratch note. It is not the fan field and it is not the title.

If two units in the pile print two diameters under the same factory SKU — one leftover 300 mm plate, one reprint at 250 mm or Ø350, or one plate that prints no fan diameter — stop and split. Do not write “300 mm fan” so the sheet still looks close unless THIS plate actually prints 300 mm. Do not paste 300 mm “so the catalog matches the sheet.” Do not convert a CFM into a guessed 300 mm because the category page expects that English diameter. You stay responsible for Amazon compliance. A listing that names the sheet fan when this inbound plate prints a different diameter — or none — is how you buy a return, a wrong-impeller install, and a safety complaint.

How a seller kits the fan diameter on this nameplate

  1. Name the child ASIN this inbound will land on. Write the catalog line — 300 mm fan — on a scratch note so you can compare it to THIS unit. Do not paste the sheet diameter into Seller Central yet.
  2. Photograph THIS unit’s inbound nameplate, or the carton panel if that is the only fan print the shopper will see. Fill the four-fact pad from that plate and the insert. Add the fan diameter exactly as this plate prints it. If the plate has 250 mm, 350 mm, or “Ø250,” write that as printed. If the plate has CFM or blade only and no fan line, write “no fan diameter on this plate” plus the printed lines. If a second unit in the pile still shows 300 mm only while this plate shows 250 mm, 350 mm, or none, that unit is a different pad or it stays off this offer.
  3. Photo the pad next to this nameplate. A scan of the catalog sheet or a stock photo of a 300 mm unit is not the exhibit. If the live title, fan field, or first bullet still says 300 mm, circle that size against the pad.
  4. Walk the Transformation Kit against this pad. Title leads with product type and the fan diameter this offer will ship if that diameter is a shopper fact. First bullet says what is in this box, including the plate fan when the category needs it. Do not write 300 mm from the sheet, “approx 300 mm,” “Ø300,” or a guessed English diameter from a CFM so purchasing still looks synced unless this plate prints that size. If this plate prints no fan line, do not invent one.
  5. If leftover 300 mm-sheet units already sit in FBA on this same child, do not receive THIS different-diameter pack — or a no-fan pack — onto that FNSKU until you split or remove the mismatch. The kit does not relabel the warehouse for you. Mixed fan diameters on one SKU are mixed defects.
  6. Run free optimize only if the English still hedges or the sheet 300 mm leaked into a bullet. The free pass does not invent a fan diameter. It only cleans the words you already wrote from this nameplate.
  7. Save the listing, then create the inbound against this pad. If you want the paid pass on this child after the shipped fan is honest, use Pro checkout. Paying does not turn a sheet 300 mm into this plate, does not convert a CFM into a guessed 300 mm, and does not promise rank.

The sheet 300 mm stays in purchasing. This nameplate is the listing

Keep the catalog sheet for the next quote if you need it. Do not leave 300 mm in the title or the fan field if THIS inbound nameplate prints a different diameter or no fan. If Friday’s next inbound reprints the sheet 300 mm only on the plate, that unit is a new pad — or it stays off this offer. Digital Dignity will not tell you the sheet fan is fine because the catalog listed 300 mm, and will not invent a fan diameter for a blank plate. When this nameplate is honest and the next lot is waiting, run the kit again on that unit.

No fake reviews. No rank promise. You stay responsible for Amazon compliance.