Digital Dignity Digital Dignity

Pulley bore from this nameplate

A seller’s catalog sheet says 19 mm pulley bore, or “Ø19 bore.” THIS inbound unit’s nameplate prints a different bore — 14 mm, 24 mm, 19mm, “bore 14,” a pulley-bore line — or no bore at all, only a shaft leftover, a keyway leftover, or a blank hub block. They almost kit the sheet 19 mm into the listing because the catalog is already open, purchasing signed that bore, and last month’s lot really was 19 mm. If you do that, a shopper or an installer reads a pulley this unit will not take, a motor job sees a bore this plate does not print, and the next receive inherits the same lie. Digital Dignity’s Transformation Kit is the check on THIS unit: photograph the inbound nameplate, kit from the pulley bore this plate prints (or from the absence of a bore line), then free optimize, then Pro.

Get the kit · Free optimize · Pro checkout

This is a listing and inbound job, not a catalog-sheet rewrite. 19 mm is how the catalog and the factory sheet quote the SKU. The nameplate on THIS inbound is what this receive actually is. The kit does not convert a sheet 19 mm into the plate bore for you. It makes you write the bore THIS plate prints — 14 mm, 19 mm, 24 mm, bore 14, a pulley-bore line that is actually stamped, or no bore at all — then you decide save, split, or hold. If this plate prints no bore line, write that absence. Do not invent 19 mm from a shaft guess so the category still looks complete.

Pulley bore is a shopper fact when the buyer is matching a motor, a fan, or a replacement sheave. It is not a title adjective you can keep “because the sheet said 19 mm.” A 14 mm plate is a different bore from a 19 mm plate. A 24 mm plate is a different bore again. Shaft diameter on the same plate is a related line, not a substitute you convert in your head and paste as 19 mm. If this plate prints Ø14 only, write the shaft as printed and leave the sheet 19 mm off the pad. Do not back-solve 19 mm from a keyway because that is how last year’s lot was quoted.

Read THIS nameplate. The sheet 19 mm stays in the folder

Pull one sealed unit from the inbound you will list or receive this week. Find the nameplate on the unit, or the bore / pulley / Ø line on the carton panel this pack prints. Write type, size or count, material, and what is in the box from that face and the insert. Then write the pulley bore exactly as this plate prints it — not 19 mm from the sheet. If this plate prints 14 mm, 24 mm, bore 14, or “Ø19,” write that line on the pad. If this plate prints no bore line at all, write that absence. Do not invent 19 mm so the category still looks complete. Photo of the pad next to this nameplate. After that, open the catalog sheet. If it still says 19 mm, leave that line on a scratch note. It is not the bore field and it is not the title.

If two units in the pile print two bores under the same factory SKU — one leftover 19 mm plate, one reprint at 14 mm or bore 24, or one plate that prints no pulley bore — stop and split. Do not write “19 mm bore” so the sheet still looks close unless THIS plate actually prints 19 mm. Do not paste 19 mm “so the catalog matches the sheet.” Do not convert a shaft into a guessed 19 mm because the category page expects that English bore. You stay responsible for Amazon compliance. A listing that names the sheet bore when this inbound plate prints a different size — or none — is how you buy a return, a wrong-sheave install, and a safety complaint.

How a seller kits the pulley bore on this nameplate

  1. Name the child ASIN this inbound will land on. Write the catalog line — 19 mm pulley bore — on a scratch note so you can compare it to THIS unit. Do not paste the sheet bore into Seller Central yet.
  2. Photograph THIS unit’s inbound nameplate, or the carton panel if that is the only bore print the shopper will see. Fill the four-fact pad from that plate and the insert. Add the pulley bore exactly as this plate prints it. If the plate has 14 mm, 24 mm, or “bore 14,” write that as printed. If the plate has shaft or keyway only and no bore line, write “no pulley bore on this plate” plus the printed lines. If a second unit in the pile still shows 19 mm only while this plate shows 14 mm, 24 mm, or none, that unit is a different pad or it stays off this offer.
  3. Photo the pad next to this nameplate. A scan of the catalog sheet or a stock photo of a 19 mm unit is not the exhibit. If the live title, bore field, or first bullet still says 19 mm, circle that size against the pad.
  4. Walk the Transformation Kit against this pad. Title leads with product type and the pulley bore this offer will ship if that bore is a shopper fact. First bullet says what is in this box, including the plate bore when the category needs it. Do not write 19 mm from the sheet, “approx 19 mm,” “Ø19 bore,” or a guessed English bore from a shaft so purchasing still looks synced unless this plate prints that size. If this plate prints no bore line, do not invent one.
  5. If leftover 19 mm-sheet units already sit in FBA on this same child, do not receive THIS different-bore pack — or a no-bore pack — onto that FNSKU until you split or remove the mismatch. The kit does not relabel the warehouse for you. Mixed pulley bores on one SKU are mixed defects.
  6. Run free optimize only if the English still hedges or the sheet 19 mm leaked into a bullet. The free pass does not invent a pulley bore. It only cleans the words you already wrote from this nameplate.
  7. Save the listing, then create the inbound against this pad. If you want the paid pass on this child after the shipped bore is honest, use Pro checkout. Paying does not turn a sheet 19 mm into this plate, does not convert a shaft into a guessed 19 mm, and does not promise rank.

The sheet 19 mm stays in purchasing. This nameplate is the listing

Keep the catalog sheet for the next quote if you need it. Do not leave 19 mm in the title or the bore field if THIS inbound nameplate prints a different size or no bore. If Friday’s next inbound reprints the sheet 19 mm only on the plate, that unit is a new pad — or it stays off this offer. Digital Dignity will not tell you the sheet bore is fine because the catalog listed 19 mm, and will not invent a pulley bore for a blank plate. When this nameplate is honest and the next lot is waiting, run the kit again on that unit.

No fake reviews. No rank promise. You stay responsible for Amazon compliance.