Digital Dignity Digital Dignity

Shaft height from this nameplate

A seller’s catalog sheet says 90 mm shaft height, or “H 90.” THIS inbound unit’s nameplate prints a different height — 80 mm, 100 mm, 112 mm, “H 90,” a center-height line — or no shaft-height line at all, only a frame size, a kW, or a blank mechanical block. They almost kit the sheet 90 mm into the listing because the catalog is already open, purchasing signed that center height, and last month’s lot really was 90 mm. If you do that, a shopper or an installer reads a shaft height this unit will not ship, a motor job sees a center this plate does not print, and the next receive inherits the same lie. Digital Dignity’s Transformation Kit is the check on THIS unit: photograph the inbound nameplate, kit from the shaft height this plate prints (or from the absence of an H line), then free optimize, then Pro.

Get the kit · Free optimize · Pro checkout

This is a listing and inbound job, not a catalog-sheet rewrite. 90 mm shaft height is how the catalog and the factory sheet quote the SKU. The nameplate on THIS inbound is what this receive actually is. The kit does not convert a sheet 90 mm into the plate height for you. It makes you write the height THIS plate prints — 80 mm, 90 mm, 100 mm, 112 mm, H 90, a center-height line that is actually stamped, or no height at all — then you decide save, split, or hold. If this plate prints no shaft-height line, write that absence. Do not invent 90 mm from a frame-size guess so the category still looks complete.

Shaft height is a shopper fact when the buyer is matching a motor, a base, or a replacement center. It is not a title adjective you can keep “because the sheet said 90 mm.” An 80 mm plate is a different center from a 90 mm plate. A 112 mm plate is a different center again. Frame size or kW on the same plate is a related line, not a substitute you convert in your head and paste as 90 mm. If this plate prints 90L frame only, write the frame as printed and leave the sheet 90 mm off the pad. Do not back-solve 90 mm from a frame chart because that is how last year’s lot was quoted.

Read THIS nameplate. The sheet 90 mm stays in the folder

Pull one sealed unit from the inbound you will list or receive this week. Find the nameplate on the unit, or the H / shaft height / center-height line on the carton panel this pack prints. Write type, size or count, material, and what is in the box from that face and the insert. Then write the shaft height exactly as this plate prints it — not 90 mm from the sheet. If this plate prints 80 mm, 100 mm, 112 mm, or “H 90,” write that line on the pad. If this plate prints no height line at all, write that absence. Do not invent 90 mm so the category still looks complete. Photo of the pad next to this nameplate. After that, open the catalog sheet. If it still says 90 mm, leave that line on a scratch note. It is not the height field and it is not the title.

If two units in the pile print two heights under the same factory SKU — one leftover 90 mm plate, one reprint at 80 mm or 112 mm, or one plate that prints no height — stop and split. Do not write “90 mm shaft height” so the sheet still looks close unless THIS plate actually prints 90 mm. Do not paste 90 mm “so the catalog matches the sheet.” Do not convert a frame size into a guessed 90 mm because the category page expects that English center. You stay responsible for Amazon compliance. A listing that names the sheet height when this inbound plate prints a different center — or none — is how you buy a return, a wrong-base install, and a safety complaint.

How a seller kits the shaft height on this nameplate

  1. Name the child ASIN this inbound will land on. Write the catalog line — 90 mm shaft height — on a scratch note so you can compare it to THIS unit. Do not paste the sheet height into Seller Central yet.
  2. Photograph THIS unit’s inbound nameplate, or the carton panel if that is the only height print the shopper will see. Fill the four-fact pad from that plate and the insert. Add the shaft height exactly as this plate prints it. If the plate has 80 mm, 112 mm, or “H 90,” write that as printed. If the plate has frame or kW only and no height line, write “no shaft height on this plate” plus the printed lines. If a second unit in the pile still shows 90 mm only while this plate shows 80 mm, 112 mm, or none, that unit is a different pad or it stays off this offer.
  3. Photo the pad next to this nameplate. A scan of the catalog sheet or a stock photo of a 90 mm unit is not the exhibit. If the live title, mechanical field, or first bullet still says 90 mm, circle that number against the pad.
  4. Walk the Transformation Kit against this pad. Title leads with product type and the shaft height this offer will ship if that center is a shopper fact. First bullet says what is in this box, including the plate height when the category needs it. Do not write 90 mm from the sheet, “approx 90 mm,” “H 90,” or a guessed English height from frame size so purchasing still looks synced unless this plate prints that height. If this plate prints no height line, do not invent one.
  5. If leftover 90 mm-sheet units already sit in FBA on this same child, do not receive THIS different-height pack — or a no-height pack — onto that FNSKU until you split or remove the mismatch. The kit does not relabel the warehouse for you. Mixed shaft heights on one SKU are mixed defects.
  6. Run free optimize only if the English still hedges or the sheet 90 mm leaked into a bullet. The free pass does not invent a shaft height. It only cleans the words you already wrote from this nameplate.
  7. Save the listing, then create the inbound against this pad. If you want the paid pass on this child after the shipped height is honest, use Pro checkout. Paying does not turn a sheet 90 mm into this plate, does not convert frame size into a guessed 90 mm, and does not promise rank.

The sheet 90 mm stays in purchasing. This nameplate is the listing

Keep the catalog sheet for the next quote if you need it. Do not leave 90 mm in the title or the mechanical field if THIS inbound nameplate prints a different height or no height. If Friday’s next inbound reprints the sheet 90 mm only on the plate, that unit is a new pad — or it stays off this offer. Digital Dignity will not tell you the sheet height is fine because the catalog listed 90 mm, and will not invent a shaft height for a blank plate. When this nameplate is honest and the next lot is waiting, run the kit again on that unit.

No fake reviews. No rank promise. You stay responsible for Amazon compliance.