Taper lock from this nameplate

A seller’s catalog sheet says taper lock included, or “Taper-Lock bushing / QD leftover / split taper.” THIS inbound unit’s nameplate or carton prints a different bushing — no taper lock, a QD leftover, a keyway leftover, “bushing not included,” a coupling leftover — or no taper-lock line at all, only a leftover, a motor leftover, or a blank accessory block. They almost kit the sheet taper lock into the listing because the catalog is already open, purchasing signed that bushing, and last month’s lot really shipped one. If you do that, a shopper or an installer reads a taper lock this unit is not packed as, a packing job sees a bushing this plate does not print, and the next receive inherits the same lie. Digital Dignity’s Transformation Kit is the check on THIS unit: photograph the inbound nameplate and the pack face, kit from the taper lock this plate or carton prints (or from the absence of a taper-lock line), then free optimize, then Pro.

Get the kit · Free optimize · Pro checkout

This is a listing and inbound job, not a catalog-sheet rewrite. “Taper lock included” is how the catalog and the factory sheet quote the SKU. The nameplate and carton on THIS inbound are what this receive actually ships. The kit does not convert a sheet taper lock into the plate bushing for you. It makes you write the bushing THIS plate or carton prints — taper lock, QD, no bushing, a bushing line that is actually stamped, or no taper-lock line at all — then you decide save, split, or hold. If this plate and carton print no taper-lock line, write that absence. Do not invent a taper lock from a leftover so the category still looks complete.

Taper lock is a shopper fact when the buyer is matching a pulley, a sprocket, or a sheave that has to land a stated Taper-Lock bushing or a stated bore kit. It is not a title adjective you can keep “because the sheet said included.” A no-bushing pack is a different pack from a taper-lock pack. A QD leftover is a different accessory from a Taper-Lock leftover. Keyway leftover, coupling leftover, or a motor leftover on the same plate is a related line, not a substitute you convert in your head and paste as “taper lock included.” If this plate prints QD only, write the QD as printed and leave the sheet taper lock off the pad. Do not back-solve a Taper-Lock from a QD leftover because that is how last year’s lot was quoted. A 1610 plate is a different bushing size from a 2517 plate. Metric on this plate is a different series from inch on that one. Bore leftover, spare leftover, or a leftover key on the same plate is a related line, not a bushing you convert.

Read THIS nameplate. The sheet taper lock stays in the folder

Pull one sealed unit from the inbound you will list or receive this week. Find the nameplate on the unit, or the accessory line on the carton panel this pack prints. Write type, size or count, material, and what is in the box from that face and the insert. Then write the taper lock exactly as this plate or carton prints it — not “included” from the sheet. If this plate prints no bushing, “QD only,” “keyway only,” or “bushing not included,” write that line on the pad. If this plate and carton print no taper-lock line at all, write that absence. Do not invent a taper lock so the category still looks complete. Photo of the pad next to this nameplate. After that, open the catalog sheet. If it still says taper lock included, leave that line on a scratch note. It is not the accessory field and it is not the title.

If two units in the pile print two bushings under the same factory SKU — one leftover taper-lock pack, one reprint with no bushing or a QD leftover, or one plate that prints no bushing line — stop and split. Do not write “taper lock included” so the sheet still looks close unless THIS plate or carton actually prints a taper lock. Do not paste “included” “so the catalog matches the sheet.” Do not convert a QD leftover into a guessed Taper-Lock because the category page expects that English accessory. You stay responsible for Amazon compliance. A listing that names the sheet taper lock when this inbound plate prints a different bushing — or none — is how you buy a return, a wrong-bore run, and a shaft or key complaint.

How a seller kits the taper lock on this nameplate

Name the child ASIN this inbound will land on. Write the catalog line — taper lock included — on a scratch note so you can compare it to THIS unit. Do not paste the sheet bushing into Seller Central yet.
Photograph THIS unit’s inbound nameplate, and the carton panel if that is the only bushing print the shopper will see. Fill the four-fact pad from that plate and the insert. Add the taper lock exactly as this plate or carton prints it. If the plate has no bushing, a QD leftover, or “not included,” write that as printed. If the plate has QD only and no taper-lock line, write “no taper lock on this plate” plus the printed lines. If a second unit in the pile still shows taper lock only while this plate shows none, a QD leftover, or a keyway leftover, that unit is a different pad or it stays off this offer.
Photo the pad next to this nameplate. A scan of the catalog sheet or a stock photo of a Taper-Lock unit is not the exhibit. If the live title, accessory field, or first bullet still says taper lock included, circle that claim against the pad.
Walk the Transformation Kit against this pad. Title leads with product type and the taper lock this offer will ship if that bushing is a shopper fact. First bullet says what is in this box, including the plate taper lock when the category needs it. Do not write taper lock from the sheet, “QD included,” “bushing included,” or a guessed English accessory from a leftover so purchasing still looks synced unless this plate or carton prints that bushing. If this plate prints no taper-lock line, do not invent one.
If leftover taper-lock-sheet units already sit in FBA on this same child, do not receive THIS different-bushing pack — or a no-bushing pack — onto that FNSKU until you split or remove the mismatch. The kit does not relabel the warehouse for you. Mixed bushings on one SKU are mixed defects.
Run free optimize only if the English still hedges or the sheet taper lock leaked into a bullet. The free pass does not invent a bushing. It only cleans the words you already wrote from this nameplate.
Save the listing, then create the inbound against this pad. If you want the paid pass on this child after the shipped bushing is honest, use Pro checkout. Paying does not turn a sheet taper lock into this plate, does not convert a QD leftover into a guessed Taper-Lock, and does not promise rank.

The sheet taper lock stays in purchasing. This nameplate is the listing

Keep the catalog sheet for the next quote if you need it. Do not leave taper lock in the title or the accessory field if THIS inbound nameplate prints a different bushing or no bushing. If Friday’s next inbound reprints the sheet taper lock only on the plate, that unit is a new pad — or it stays off this offer. Digital Dignity will not tell you the sheet bushing is fine because the catalog listed included, and will not invent a taper lock for a blank plate. When this nameplate is honest and the next lot is waiting, run the kit again on that unit.

No fake reviews. No rank promise. You stay responsible for Amazon compliance.